Durable gear for Beasts & Bees

Free shipping at $150 (details)

{"id":679105626158,"title":"Beehive Winter Insulation Wrap - NOVEMBER 18. WE ARE MAKING MORE. PLEASE CALL TO RESERVE.","handle":"beehive-winter-cover-for-10-frame-langstroth-hive","description":"\u003cp\u003eNOVEMBER 18.\u003c\/p\u003e\n\u003cp\u003eTEMPORARILY SOLD OUT. WE ARE MAKING MORE. PLEASE CALL TO RESERVE.\u003c\/p\u003e\n\u003cp\u003eMade in Montana, USA (where we understand cold winters), our Beehive Winter Insulation Wrap is the premier solution for helping your bees survive harsh winters.\u003c\/p\u003e\n\u003cp\u003eMost hive wraps cover only the side of the hive but leave the top exposed to cold and moisture. And those plastic-wrap versions don't allow the top of the hive to breathe away moisture.\u003c\/p\u003e\n\u003cp\u003eWe have developed a true hive insulation and cover system that focuses on keeping your hive dry! Our Beehive Winter Insulation Wrap covers the sides \u003cem\u003eand\u003c\/em\u003e top of your hive while still allowing for air and bee movement in and out of the hive at four and two points respectively.\u003c\/p\u003e\n\u003cp\u003eThe Big Shrimpy Beehive Winter Insulation Wrap utilizes PVC-coated, waterproof polyester fabric on the outside, a thick, wool-like polyester material on the inside and two inches of \u003cem\u003epolyester\u003c\/em\u003e insulation between the two (not water absorbing fiberglass).\u003c\/p\u003e\n\u003cp\u003eOur Beehive Winter Insulation Wrap is built to fit a 10-frame Langstroth hive and is designed to pair up with our Moisture Box and Sugar Patty Feeder (SOLD SEPARATELY) but you can easily build your own woodenware to go with it. \u003c\/p\u003e\n\u003cp\u003eBuying a new colony in the spring is expensive. Our Beehive Winter Insulation Wrap can pay for itself in one season by adding some insurance that your bees survive the winter.\u003c\/p\u003e\n\u003cp\u003eThe top of the Beehive Winter Insulation Wrap is adjusted with the red nylon straps to account for height differences in the lid of your hive or if you use your own moisture box or patty feeder of a slightly different height than ours.\u003c\/p\u003e\n\u003cp\u003eYour bees can fly in and out of the hive through the flight tubes that integrate the Beehive Winter Insulation Wrap with our Sugar Patty Feeder. Our Sugar Patty Feeder (SOLD SEPARATELY) comes with two tubes that extend through the front and back grommets of the Beehive Winter Insulation Wrap.These tubes also allow for a small amount of fresh air to move through the hive.\u003c\/p\u003e\n\u003cp\u003eThe grommets on the sides of the Beehive Winter Insulation Wrap match up with the screened ventilation holes in our Moisture Box (SOLD SEPARATELY) to allow air to wick away moisture. Fill our Moisture Box with the absorbent material of your choice or use a box of your own design.\u003c\/p\u003e\n\u003cp\u003eOur Beehive Winter Insulation Wrap provides a warm insulating blanket \u003cem\u003eand\u003c\/em\u003e cover around your hive that absorbs passive solar heat, blocks wind, allows the hive to breathe and for bees to come and go on the warmer days. Our Beehive Winter Insulation Wrap provides your colony with that additional chance of survival.\u003c\/p\u003e\n\u003cp\u003eProtect your investment season after season. Your bees will thank you and saving them will save you money. It's not too early to start preparing for next winter. Give your girls that extra fighting chance of survival in extreme cold and wind with this rugged beehive wrap.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/OZw-M1flpoo\" frameborder=\"0\" allow=\"autoplay; encrypted-media\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","published_at":"2018-05-18T14:17:32","created_at":"2018-05-18T14:29:24","vendor":"Mosier Valley","type":"Beehive Equipment","tags":["Beehive","Beehive Insulation","Beehive Winter Cover","Beehive Winter Wrap","Beehive Wrap","Beekeeping","Beekeeping Equipment","Beekeeping Tools"],"price":15900,"price_min":15900,"price_max":15900,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":true,"all_variant_ids":[7820221382702],"variants":[{"id":7820221382702,"product_id":679105626158,"product_handle":"beehive-winter-cover-for-10-frame-langstroth-hive","title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"9286","requires_shipping":true,"taxable":false,"featured_image":null,"image_id":null,"available":false,"name":"Beehive Winter Insulation Wrap - NOVEMBER 18. WE ARE MAKING MORE. PLEASE CALL TO RESERVE. - Default Title","options":["Default Title"],"price":15900,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","inventory_in_cart":0,"inventory_remaining":0,"incoming":false,"next_incoming_date":null,"taxable":false,"barcode":"877146009286"}],"available":false,"images":["\/\/cdn.shopify.com\/s\/files\/1\/1771\/3095\/products\/Cover1.jpg?v=1538951554","\/\/cdn.shopify.com\/s\/files\/1\/1771\/3095\/products\/CoverNoTop1.jpg?v=1536764081","\/\/cdn.shopify.com\/s\/files\/1\/1771\/3095\/products\/CoverInterior1.jpg?v=1537463006","\/\/cdn.shopify.com\/s\/files\/1\/1771\/3095\/products\/Top1.jpg?v=1537463026","\/\/cdn.shopify.com\/s\/files\/1\/1771\/3095\/products\/Complete_Hive.png?v=1536764146","\/\/cdn.shopify.com\/s\/files\/1\/1771\/3095\/products\/Hive_No_Lid1.jpg?v=1536764182","\/\/cdn.shopify.com\/s\/files\/1\/1771\/3095\/products\/CloseUp.jpg?v=1537463095"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1771\/3095\/products\/Cover1.jpg?v=1538951554","options":["Title"],"url":"\/products\/beehive-winter-cover-for-10-frame-langstroth-hive"}

Beehive Winter Insulation Wrap - NOVEMBER 18. WE ARE MAKING MORE. PLEASE CALL TO RESERVE.

Please choose from the options below
$159.00
Maximum quantity available reached.
SKU: 9286

NOVEMBER 18.

TEMPORARILY SOLD OUT. WE ARE MAKING MORE. PLEASE CALL TO RESERVE.

Made in Montana, USA (where we understand cold winters), our Beehive Winter Insulation Wrap is the premier solution for helping your bees survive harsh winters.

Most hive wraps cover only the side of the hive but leave the top exposed to cold and moisture. And those plastic-wrap versions don't allow the top of the hive to breathe away moisture.

We have developed a true hive insulation and cover system that focuses on keeping your hive dry! Our Beehive Winter Insulation Wrap covers the sides and top of your hive while still allowing for air and bee movement in and out of the hive at four and two points respectively.

The Big Shrimpy Beehive Winter Insulation Wrap utilizes PVC-coated, waterproof polyester fabric on the outside, a thick, wool-like polyester material on the inside and two inches of polyester insulation between the two (not water absorbing fiberglass).

Our Beehive Winter Insulation Wrap is built to fit a 10-frame Langstroth hive and is designed to pair up with our Moisture Box and Sugar Patty Feeder (SOLD SEPARATELY) but you can easily build your own woodenware to go with it. 

Buying a new colony in the spring is expensive. Our Beehive Winter Insulation Wrap can pay for itself in one season by adding some insurance that your bees survive the winter.

The top of the Beehive Winter Insulation Wrap is adjusted with the red nylon straps to account for height differences in the lid of your hive or if you use your own moisture box or patty feeder of a slightly different height than ours.

Your bees can fly in and out of the hive through the flight tubes that integrate the Beehive Winter Insulation Wrap with our Sugar Patty Feeder. Our Sugar Patty Feeder (SOLD SEPARATELY) comes with two tubes that extend through the front and back grommets of the Beehive Winter Insulation Wrap.These tubes also allow for a small amount of fresh air to move through the hive.

The grommets on the sides of the Beehive Winter Insulation Wrap match up with the screened ventilation holes in our Moisture Box (SOLD SEPARATELY) to allow air to wick away moisture. Fill our Moisture Box with the absorbent material of your choice or use a box of your own design.

Our Beehive Winter Insulation Wrap provides a warm insulating blanket and cover around your hive that absorbs passive solar heat, blocks wind, allows the hive to breathe and for bees to come and go on the warmer days. Our Beehive Winter Insulation Wrap provides your colony with that additional chance of survival.

Protect your investment season after season. Your bees will thank you and saving them will save you money. It's not too early to start preparing for next winter. Give your girls that extra fighting chance of survival in extreme cold and wind with this rugged beehive wrap.

PLEASE CAREFULLY READ OUR WARRANTY AND RETURN POLICIES BELOW

WE WARRANTY ONLY THE PET BEDS WE MANUFACTURE AND SELL UNDER THE BRAND NAMES BIG SHRIMPY, MOSIER VALLEY AND MARIPOSA.

OUR WARRANTY DOES NOT COVER DAMAGE DUE TO PET BEHAVIOR. IF AN ITEM IS DAMAGED BY PET BEHAVIOR AFTER A MANUFACTURING DEFECT BECOMES EVIDENT, THE WARRANTY IS VOID.

IF AN ITEM(S) ON AN ORDER THAT RECEIVED FREE SHIPPING IS RETURNED TO US, WE WILL DEDUCT OUR SHIPPING COST FROM THE AMOUNT TO BE REFUNDED FOR THE RETURNED ITEM(S). REFUNDS ARE GIVEN ONLY TO ITEMS THAT COME BACK TO US IN A NEW AND UNUSED CONDITION.

REFUNDS ARE GIVEN ONLY TO ITEMS THAT COME BACK TO US IN A NEW AND UNUSED CONDITION.

WE DO NOT WARRANTY PRODUCTS SOLD ON THIS WEBSITE THAT ARE NOT BIG SHRIMPY, MOSIER VALLEY AND MARIPOSA BRANDED PRODUCTS (e.g. DOG TREATS).

Our Warranty Policy - If a Big Shrimpy, Mosier Valley or Mariposa product fails due to a manufacturing defect within its warranty period as defined below, we will repair or replace it at our discretion.

Our Warranty does not cover normal wear on product fabrics (e.g. such as holes or tears caused by pets scratching at fabric).

Warranty Periods

Big Shrimpy - Catalina Classic, Original, Nest and their component parts: 3 year warranty from date of purchase

Big Shrimpy - Catalina Plush, Bogo, Easy, Den, Hug Blanket, Landing Pads and their component parts: 2 year warranty from date of purchase

Big Shrimpy - Mesh Refresh wash bag and Versa Seat Protector: 1 year warranty from date of purchase

Mariposa products - 2 year warranty from date of purchase

Mosier Valley products - 1 year warranty on workmanship from date of purchase. Does not cover damage due to pet behavior or, in the case of our Beehive Winter Insulation Cover, damage caused by rodents.

Items returned for warranty must be accompanied by a copy of a dated receipt or the original order number. THE WARRANTY FOR ITEMS NOT PURCHASED DIRECTLY THROUGH WWW.BIGSHRIMPY.COM MAY HAVE OTHER RESTRICTIONS. WARRANTY QUESTIONS FOR ITEMS PURCHASED ELSEWHERE SHOULD BE DIRECTED TOWARDS THE RETAILER THAT SOLD THE ITEM TO YOU.

Warranty Procedure

Before returning an item for a warranty issue, it is often best to confirm that the situation meets our warranty requirements.  Please contact us at service@bigshrimpy.com and include a photo of the warranty issue with the message. We may ask you to send the item in to us for evaluation. If the item shows signs of damage by pet behavior the warranty is void.

After you receive confirmation that the item qualifies for repair or replacement, we will send a call tag to collect the item from you or replace the item (at our discretion).  If we send a call tag for the item, please send the item back to us with your original order number, your name, current address, email address and telephone number. We will pay for shipping the repaired or replacement item back to you.

Items for repair or replacement should be sent via UPS or FedEx to:

Big Shrimpy
15 North 15th Street
Billings, MT 59101

We will email or call you when the item has been received and processed.

Please allow up to 15 business days from the date that we receive a warranty item to review and fix the item, at which time we will ship it back to you.

Our Return Policy

Any item returned to us for a refund must arrive back to us in a NEW AND UNUSED CONDITON in order to qualify for a refund.  “NEW AND UNUSED CONDITION” means that the item must show no signs of use including no presence of hair, dirt, urine, saliva, pet odors, etc.  An item that shows any sign of use will not qualify for a refund or credit.  Purchaser is responsible for the cost of shipping a return item to us.  If the item is returned and shows signs of use, we will charge the purchaser for the cost of shipping the item back to him or her and will not issue a refund or credit.

PLEASE MEASURE THE SPACE WHERE YOU PLAN TO PUT THE ITEM YOU ARE PURCHASING FROM US TO BE SURE IT WILL FIT.  SHIPPING PET BEDS IS EXPENSIVE AND WE REALLY DON’T WANT YOU TO HAVE TO SEND AN ITEM BACK TO US TO GET A DIFFERENT SIZE. WE HAVE STATED THE DIMENSIONS OF OUR PRODUCTS IN THE “PRODUCT SPECIFICATIONS” SECTION FOR EACH PRODUCT.

Big Shrimpy offers customers the opportunity to participate in its Full Circle recycling program. Customers may recycle any Big Shrimpy, Mosier Valley or Mariposa product ever purchased.

Before you take part in our recycling program, we want to make sure you’re aware:

  • Other than the padded insert for the Landing Pad crate mat, every part of of all of our products, including the SmartFill® fiber we use to fill our pet beds, is machine washable and dryable. The insert for the Landing Pad should be hand washed as it contains a recycled foam core which will absorb water.
  • Big Shrimpy pet bed and Landing Pad covers, empty inner liners, filled inner liners, and crate pad cushions are all available for purchase separately.
  • With these options, your Big Shrimpy product may last forever but if you have finally decided that it’s time for your worn-out, used-up, Big Shrimpy, Mosier Valley or Mariposa product to go away…don’t throw it out! Send it in! We will recycle the outer cover, inner liner, the SmartFill or pad into blended fibers that can be used in other industries.

Recycling Instructions

!! Important !! Please wash and dry all parts of your Big Shrimpy, Mosier Valley or Mariposa product, including the SmartFill fiber (if the item contains SmartFill) according to our washing and drying instructions. If it’s a bed you’re sending in, you do not need to reassemble it. Just box up all the washed and dried components and send it via UPS or FedEx to: 

Big Shrimpy
Full Circle Recycling
15 North 15th Street
Billings, MT  59101

We are proud to be the first and only company to offer recycling of its pet beds, and we know we could not do it without the participation of our customers. Ultimately it’s you who does the recycling.  Without you it doesn’t happen. Thank you!

Video coming soon...